RuneApps forums

Duradel

Member

Registered: 2015-11-29

Posts: 29

Some functionalities not working [SOLVED]

Hiya

I've bought a new laptop (higher resolution screen, Ultra HD 4K).
I cannot get the xpMeter working as well as some of the new clue functionalities (show range + compass clue, can't detect teleports when pressing alt1 on rightclick teleport).
Under settings<capture I get the following message: http://puu.sh/lDiv0.png

Anything I can try to get these functionalities working? Btw, I'm playing in the English language client, as I've seen there are issues with the localised versions.

Thanks for the wonderfull app, I'm excited to see these new functionalities!

Duradel

Edit: Additional info: running Windows10 (but it didn't work in 8.1 either) and using the official RS Client.

Last edited by Duradel (2015-12-01 14:58:30)

Skillbert

Administrator

Registered: 2014-12-30

Posts: 1,061

Re: Some functionalities not working [SOLVED]

Alt1 should be comppatible with your settings. You probably have some value overwritten in your graphics card settings, make sure that stuff like AA is set to "let program decide".

If you post a screenshot i can get some more information about whats going on, however i need a screenshot of rs how alt1 sees it. I updated the imgshare browser page to be able to upload alt1 screen data. Please add the app by clicking here. Click the "grab from rs" button to load what alt1 sees into the window. You can then upload the image. Please post the image code/url here.

Duradel

Member

Registered: 2015-11-29

Posts: 29

Re: Some functionalities not working [SOLVED]

Dear Skillbert

Here's the url you asked. 
As for my graphic card, I haven't changed any settings other than forcing rs being run by my GTX965 card rather than my crappy intel one. As for the AA (Anti Aliasing I reckon?), this is set to 'standard setting (off)'. I tried toggling it on but I'm still not getting any result.

Some screens of my graphic card control panel: http://puu.sh/lE9ha.png http://puu.sh/lE9iv.png and http://puu.sh/lE9jj.png
They are in Dutch, I'm sorry for that but willing to translate it as good as I can if needed.

Kind regards

Duradel

Skillbert

Administrator

Registered: 2014-12-30

Posts: 1,061

Re: Some functionalities not working [SOLVED]

Thanks for the screenshot.
It seems like i forgot about transparent interfaces when designing the scan range indicator. I'll see what i can do for that.
As for the xpmeter, it is able to detect it from the screenshot for me. However it is unable to track maxed counters as they don't actually change with xp gains. It will still work for dg and slay tho.
The compass clue solver should work, make sure you're hovering over a right-click option that will teleport you if clicked.

Duradel

Member

Registered: 2015-11-29

Posts: 29

Re: Some functionalities not working [SOLVED]

Hiya

The transparancy issue indeed prevented the scan range from working, I will test the compass clue asap and see if this was the same case for those.

The XpMeter however is acting weird, I've made a video to show what's happening. Basically it cannot find my xp meters when I move them top left (even when using black background). Could you take a look at the following video? https://www.youtube.com/watch?v=gjpbBrzs4S4

Thanks for the help! Hoping you will be enable to support transparant interfaces :x.

Duradel

Member

Registered: 2015-11-29

Posts: 29

Re: Some functionalities not working [SOLVED]

Update: The compass does not seem to work (or I'm doing something wrong). I was pressing alt + 1 whilst right clicking. Not sure what I'm doing wrong or why it's not working.

Here's the vid: https://www.youtube.com/watch?v=ieg8j8VQdt4 (ignore the sound, forgot to turn off). Also, I've tried for the other teleports too so not just Falador.

Last edited by Duradel (2015-11-30 19:13:44)

Skillbert

Administrator

Registered: 2014-12-30

Posts: 1,061

Re: Some functionalities not working [SOLVED]

Thanks for the info.
I suspect that alt1 fails to translate your cursor position to the proper position on the raw game pixels.
I made a little page that outputs some debug info. You can open it by clicking here. Can you post the output?

You can see more about what is going on behind the scenes by enabling the debug overlay in the setings.

The red squares are the areas where alt1 grabs pixels from rs, pink means pixels from the screen. The green square shows the edge of the overlay and doesn't matter here. It will also show the text that is read under the cursor when you press alt+1, so you can use that to get a feeling of whats going on.
The debug overlay will show a ton of smaller red squares when it is searching for the xp counters, these squares indicate that alt1 suspects there to be text underneath and will try to read it.

(This happens when rightclick and press alt+1 over the walk-here option)

Duradel

Member

Registered: 2015-11-29

Posts: 29

Re: Some functionalities not working [SOLVED]

Dear Skillbert

Here's the info I got after starting that application you sent:

Alt1 version: 1.2.1
rs window linked
  scale factor: 1.25
  rs inner position: 0,29
  rs inner size: 1920x1001
screen origin: 0,0
screen size: 1920,1080

Also, a video of me using the debugger. I don't know much about it, but it seems the red boxes are positioned correctly. I don't have an elite clue atm to test but I can get one to test more if necessary.
The xpmeter is not found by alt1 as you can see in this vid: https://www.youtube.com/watch?v=6pyMDGKVoVQ

Thanks for your quick feedback!

Edit: typo

Last edited by Duradel (2015-12-01 13:31:59)

Skillbert

Administrator

Registered: 2014-12-30

Posts: 1,061

Re: Some functionalities not working [SOLVED]

Thanks for all the screenshots and video's. I found the problem and it seems like you have turned off dpi scaling for rs, while it's on for the rest of your system. This makes alt1 overcompensate and everything related to positioning breaks. I'm trying to find a solution to this.
Meanwhile you can fix it by either turning off dpi scaling completely or settings rs to the same dpi as the rest of your system.
You can do that by un-checking this checkbox under the rs properties. You can open this menu by right-clicking the runescape shortcut and selecting properties.

Duradel

Member

Registered: 2015-11-29

Posts: 29

Re: Some functionalities not working [SOLVED]

Hi again

I first tried unchecking the box like you showed, however it was not checked. I tried checking it instead (thought I understood you wrong), but it did not work either. I unchecked it again, restarted RS but nothing.

However, when I went to the dpi scaling (I hope that's here: http://puu.sh/lFqrR.jpg) it was set to 175%  but I couldn't change it. It just said that it was applied. When I toggled it off, the apps seem to be running perfectly!
My icons on the task bar and desktop are a bit smaller but I like it this way.

Thanks for all the help, brilliant!